What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 02.07.2025 20:34

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

The third is lightning and “how it gets conducted into a home.”

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

These are simplified answers to the original question, and does not change anything I wrote above.

How do you view men and women who cheat?

One

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

He then describes the function of a fuse.

U.S. Open power rankings: Every player at Oakmont ranked Nos. 1-156 - NBC Sports

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

Barnstars:

I post the exact comment here.

NFL Declines Comment on Viral Video of Patriots' Stefon Diggs Partying on Boat - Bleacher Report

[old diagram got deleted by accident]

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

In schematic diagrams this is the symbol for a fuse:

Plants Grow Hidden Second Root System – And It’s Helping Fight Climate Change - SciTechDaily

An AC voltage/ current source, and an ac inductive load.

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

There are three different concepts here that are getting confused.

Why did the Greek city state never form an empire?

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

a photo is worth a thousand words.

But it can get overloaded, and no longer works.

Non est eum facere impedit aut dignissimos tempora.

So, the voltage could go up to 500 volts, and the fuse will not open up.

It seems Mohan does not understand the difference between a comment and an Answer.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

When did women stop wearing bonnets in North America?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

eight

3 keys to success every Citadel intern learns their first week on the job - Business Insider

2024–10–14 [Omar Gharbi Omar Gharbi ]

First Sentence:

What is lightning?

Bitcoin (BTC) Price Climbs After Trump Tells GOP Not to Worry About Deficit Spending - CoinDesk

The bolt then partially travels down the line to your home.

This one hit behind the barn.

so, what happens?

What are the top AI tools enhancing workplace productivity in 2025?

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Shiba Inu risks 18% drop, but whales keep buying – What do they know? - AMBCrypto

This is 'the assistant's answer'

Because the load is inductive, the current lags the voltage.(by a bit).

These devices are installed between the “hot” and “neutral” and protective ground.

Helen Hunt on why she's rejecting Hollywood beauty standards - USA Today

but this device (an Inductor) … impedes the rapid changes in the current.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

This is where this question deviates from being a 'generic' question, and becomes more specific.

Why do diabetic people sweat so much?

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

The MOV will conduct when the voltage exceeds 50% of line voltage.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

Now when you have a certain ac resistance, then a current flows in a loop.

what exactly is a ‘surge’ protector?

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Here is a simplified AC power diagram.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

At least they know the answer if they wanted it.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

He then describes Rainy Season and Lightning.

For this case there are devices called Metal oxide varistors (MOV).

It also is a device that limits the change in current flow.

A fuse is a non-resetable over current circuit protector.

A circuit breaker is similar, but is resettable.

What does a fuse do?

(Dc diagram shown, AC is similar).

This is where the MOV conducts again, and dissipated the energy.

2024–10–16 [ OO OLAOYE OYEBODE ]

The other is “what does a “fuse” do?”

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

the problem then depends on "how fast does the fuse operate?".

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

One is “what exactly is in a ‘surge protector’ ? ”

[image of Common-mode choke]

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

nine

Edit 2024–10.

This device then solves the entire problem.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

At one ohm, the resistor has a maximum of 1 watt power.

Upvotes:

There are two important concepts here.

But… the neutral is now “floating” because of the 1 ohm resistance.

He then asserts :

2024–10–10[John johnson John Johnson ]

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

but I think this circuit , shows a few more pieces.